20s/2 dyed siro spinning polyester sewing yarn for socks

Although siro spinning has been greatly improved in many aspects compared with similar conventional yarns, there are still some ways to achieve the real non-sizing and weaving of wool single yarn.

Siro Spun Polyester Yarn

Siro spinning yarn is to feed two roving yarns with a certain distance into the spinning frame. After drafting, the front roller outputs the two single yarn slivers. The pla/colored cotton Siro spinning transfers twist to the single yarn sliver with a small amount of twist. After blending, it is further twisted into a yarn similar to the ply and wound on the barrel tube. The initial design purpose of siro spinning is to be used in wool spinning, which is characterized by less hairiness, high strength and good wear resistance, so as to achieve the effect that wool yarn can be weaved by single yarn, so as to realize the lightening and thinning of wool fabrics.

 Although siro spinning has been greatly improved in many aspects compared with similar conventional yarns, there are still some ways to achieve the real non-sizing and weaving of wool single yarn. A certain distance. After starting wool spinning also give up this method, but in blending such as T/C, C.V.C. this method is used, because it can produce twist effect after dyeing, feel good, so it is loved by everyone. Recently, because of improving hairiness problems, such as spinning some hairiness-prone fibers, such as artificial cotton, Modal, Tencel, soybean fibers. Even all cotton is produced by this method. The registration of raw materials used in siro spinning yarn is lower than that of conventional ring spinning, and the fabric has fewer hairiness, softer handle, wear resistance, air permeability, and breaking end output. Because the two fibers of siro spinning oil with a certain distance are fed into the drawing area of the spinning yarn, and are drafted separately. 

After twisting, two strands of yarn have one broken end and another running single yarn. When the spinning tension is stable, the wrong count yarn is caused. In order to ensure the spinning quality, Siro spinning single yarn interrupting device is needed. One broken end interrupting device can interrupt another single yarn.

1. Polyester yarn is an important variety of synthetic fiber yarn, and it is the commodity name of polyester fiber yarn in China. 

Polyethylene terephthalate (PET), a fibre-forming polymer, is prepared from purified terephthalic acid (PTA) or dimethyl terephthalate (DMT) and ethylene glycol (EG) by esterification, transesterification and polycondensation. 

It is a fibre yarn made by spinning and post-treatment. Varieties of polyester filament yarns: 1. Initial yarn: Undrawn yarn (conventional spinning) (UDY), Semi-Pre-oriented yarn (medium speed spinning) (MOY), Pre-oriented yarn (high speed spinning) (POY), High-Oriented yarn (ultra-high speed spinning) (HOY) 2. Drawing yarn: Drawing yarn (low speed drawing yarn) (DY), Full-Drawing yarn (spinning and drawing). Deformation yarn: conventional deformed yarn (DY), drawing deformed yarn (DTY), air deformed yarn (ATY).

2. POY is a kind of pre-oriented yarn, a full-polyester textile material. 

It is a yarn directly drawn from polyester chips (made from petroleum extracts) by melt spinning in spinning equipment. POY: Preoriented Yarn/partially oriented yarn.When the speed of high speed spinning is 3000-3600m/min, the preferred yarn can be made. At high winding speed, the fibers have a certain degree of orientation, and the structure is relatively stable.

FDY is a yarn made of POY yarn by traction, so it is called full polyester traction filament yarn. FDY: Fully drawn yarn ,now it is widely used as the code name of one-step spinning and drawing process. It can be used for low-speed spinning and high-speed drawing and winding. The two processes are completed on a spinning and drawing machine. The production cost of this production line is low, and the quality of finished products is stable, the broken ends of wool are few, and the dyeing uniformity is good. Washing down is the interweaving of POY yarn and FDY yarn.

DTY: Draw texturing yarn drawing texturing yarn. Usually known as polyester low elasticity yarn, is a continuous or simultaneous stretching, deformation processing of finished yarn on a machine.

DTY fibers are curly, POY and FDY fibers are straight, while FDY fibers have better strength and POY fibers are less powerful.

3. The so-called elasticity is the production process of polyester pre-oriented yarn (POY) produced by chemical fibre spinning enterprises

which is heated and shaped into polyester elastic yarn (DTY) by elasticity car as textile raw material. 

The town chemical fiber bombing industry started in the 1980s and flourished in the 1990s. At present, there are more than 1,000 large and small bombing enterprises in the town, and nearly 2,000 bombing equipments of all kinds. Almost all bombing equipments in the world can be found in the town, which is called "bombing equipment exposition" by experts. 

This year, the production of polyester elastomeric yarn in this town can reach 1 million tons, accounting for 20% of the domestic production of elastomeric yarn, and 10% of the world production. It has become the "first town of China's chemical fiber elasticity" at home and abroad. Up to now, the processing of chemical fiber and elastic filament is the main part of Huangjing Town, which initially forms the industrial chain of chemical fiber and elastic filament upstream and downstream, and gradually extends and expands to both ends. More than half of the town's 50,000 resident population are directly engaged in chemical fiber bombing industry or beneficiary related services. It is estimated that this year's output value of the whole town's chemical fiber bombing industry will exceed 10 billion yuan.

4. Elastomer plays the role of stretching and deformation. 

The product is DTY, also known as elastic yarn. Different from raw materials, polyamide DTY, polyester DTY and polypropylene DTY are used in textile industry. 

They are mainly used in Jiangsu, Zhejiang, Guangdong, Fujian and Shandong provinces. Fifth, network yarn is needed in textile industry. Net yarn refers to the long yarn with periodic net points in which the single yarn is intertwined by jet air in the network nozzle. Net processing is mostly used to process POY, FDY and DTY. 

The low elasticity net yarn produced by combining net technology and DTY technology not only has the fluffy property and good elasticity of textured yarn, but also has many periodic and network points, which improves the tightness of filament, eliminates some processes of textile processing, and improves the tow passing through water-jet loom. 

Ability. DTY and FDY are filament yarns. Net yarn generally refers to DTY network yarn. It's the yarn with dots in DTY.