Key points of low cotton rotor spun yarn with weak twist（1/2)

25 Dec / 2019

Application of rotor spinning weak twist yarn...

The value of spinning mainly depends on the tensile strength.

23 Dec / 2019

What are the causes of the influence on the minimum strength of spinning and the solutions?...

How to choose suitable cot apron according to types of slub yarn?

17 Dec / 2019

Slub yarn is a new type of fancy yarn popular in recent years. Its quality directly affects the weaving efficiency and fabric style of the later process. Cots and aprons are the main equipment of spin......

Main reasons for the cot winding in the spinning process?

13 Dec / 2019

in the spinning process, the main reasons for wrapping and winding the cots are as follows...

Cause of ring spinning defects and process control

13 Dec / 2019

The maturity, fiber length, linear density and strength of raw cotton are the basic factors that determine the yarn quality, which are closely related to the maturity of raw cotton. Because the maturi......

Number of return slips produced by the class

09 Dec / 2019

In the production management and cost management of textile mills, more attention is paid to the number of return slips produced in shifts, because it directly affects the cotton consumption coefficie......

Causes of main defects in roving process and solutions

04 Dec / 2019

The main task of roving process is to draw and thin the mature sliver provided by drawing process according to a certain drafting multiple, improve the parallel straightness of the fiber, plus appropr......

Factors affecting the stability of air splicing

03 Dec / 2019

At present, the textile industry is facing the current situation of structural adjustment and product upgrading. As the key component of the automatic winder, the contradiction between the air splicer......

The cause analysis and control of the cross bar of knitted yarn(4/4)

29 Nov / 2019

...

The cause analysis and control of the cross bar of knitted yarn(3/4)

29 Nov / 2019

...

The cause analysis and control of the cross bar of knitted yarn(2/4)

27 Nov / 2019

This page focuses on the analysis of the main causes of knitted fabric rungs caused by the characteristics of raw materials, the use of raw materials, spinning process, etc., and discusses the practic......

The cause analysis and control of the cross bar of knitted yarn(1/4)

26 Nov / 2019

This page focuses on the analysis of the main causes of knitted fabric rungs caused by the characteristics of raw materials, the use of raw materials, spinning process, etc., and discusses the practic......

How to deal with quality problems in spinning?(6/6)

20 Nov / 2019

The unevenness index includes the weight unevenness index and the sliver evenness index. The general spinning factory pays more attention to the unevenness index, and the monitoring level is also high......

How to deal with quality problems in spinning?(5/6)

19 Nov / 2019

Some quality problems in spinning, such as hairiness, nep, different fiber, strong weak ring and immature fiber content percentage, are all important problems that directly affect yarn quality, fabric......

How to deal with quality problems in spinning?(4/6)

18 Nov / 2019

Yarn hairiness is harmful in quite a few textiles, especially in air-jet looms, it is required to reduce hairiness as much as possible, especially the harmful hairiness over 3 mm. However, some fabric......

How to deal with quality problems in spinning?(3/6)

14 Nov / 2019

Immature fiber: refers to the cotton fiber with thin cell wall, large lumen, no twist, and partial ribbon fiber....

How to deal with quality problems in spinning?(2/6)